For water, steam, gas, and general use

●T-8110 Globe type single seated control valves
This control valve is a control valve with a wide range of application, from water and steam to gas,etc.

●T-8020 Low flow control valves
This control valve is a control valve suitable for very small flow control. The valve is screwed connection type, small and lightweight.

●T-8710 Angle type control valves
This control valve is an angle-style control valve with a characteristic of small flow path resistance. The valve is also a control valve with a wide range of application, from water and steam to gas,etc.

For high pressure, high differential pressure, and low noise

●T-8131 T-8132 T-8133 T-8136 Cage type contorl valves
Cage type contorl valves is a pressure balance control valve which is applicable to controlling high pressure or high differential pressure fluid by balancing the pressure in the cage. Trims can be combined according to uses. Applicable to a wide range of temperature from -196℃ to 500℃.

●T-8110 Labyrinth port type contol valves
This plug type control valve is a control valve for control of erosion caused by liquid. The structure with a labyrinth groove on the valve plug works as a multistage pressure reduction type throttle and prevents abrasion of the seat surface. The control valve is applicable to controlling high temperature and high differential pressure liquid, and suitable for control valves for supplying water to boilers etc.

For acid and alkali

●T-8210 Acid & Alkali service control valves

●T-8220 Acid & Alkali service control valves
Those valves have excellent corrosion resistance to acid and alkali fluid because the wetted part is made of resin.The valves provides high seal performance with a gland packingless structure eqipped with a PTFE bellows.

●T-8450 Diaphragm type control valves
This valve features a simple structure where a diaphragm controls the flow path without stagnation. Resin lining is applied to the flow path surface of the body to provide high corrosion resistance.

For toxic fluid and vacuum service

●T-8115 Single seated bellows control valves
This control valve has a structure equipped with an external pressure type bellows. The seal perfomance is superior to that of a general gland structure. Therefore, the control valve is applicable to controlling toxic fluid and vacuum service.

●V-5705 High pressure bellows angle type control valves
This control valve is an angle-style control valve equipped with a bellows which is resistant to high pressure to 10.5 MPa G.

For Low temperature control valves

●T-8020 T-8110 For Low temperature control valves
Those control valves are control valves which control low-temperature fluid whose temperature is down to -196℃, such as liquefied gas,liquefied oxygen. There are two kinds of extension length. One is for 0℃ to -50℃, and the other is for -51℃ to ℃196℃.

●T-8800 Super low temperature control valves
This control valve is a control valve which controls ultra-low temperature fluid, such as liquid helium whose service temperature is close to the absolute zero degree. The valve is installed by welding in a vacuum container.

For mixing and diverging

●V-5310 V-5320 Mixing type control valves

●V-5310 V-5320 V-5330 Dividing type control valves
There are two kinds of three-way control valves.One is a maixing three-way valve which mixes two kinds of fluid into one.The other is aflow dividing three-way valve which divides fluid into two directions.

For tank bottom

●V-6110 Inside valve type bottom valves
This valve is a lowering disc type where the plug lowers into the valve body and valve is opened.

●V-6120 Outside valve type tank bottom valves
This valve is a rising disc type where the plug rises and the valve is opened.

●V-6125 Outside valve type bellows tank bottom valves
This valve is arising disc type tank bottom valve with a structure where an external pressure type bellows is assembled.　The seal performance is superior to that of avalve with a general gland structure.

●V-6123 Outside valve type steam jacket coverd tank valves
This valve is a rising disc type tank bottom valve where the heat retaining property of the inside of the flow path is improved by providing a steam jacket to the main body.

Butterfly type valves

●V-6850 Ceramic butterfly valves
Ceramic butterfly valve with excellent abrasion resistance.

●V-5510 Butterfly type valves

●T-8113 Semi-jacket type single seated control valves
Single-seated control valve with a steam semi-jacket suitable for highly viscous fluid.

●T-8115 Full-jacket bellows single seated control valves
Control valve where a bellows is installed in the gland, and the valve body and the bellows case are covered with steam jackets.

●T-8720 Division angle type control valves for slurry water solution
Angle-style control valve which features one side cut plug where slurry fluid is hard to clog.

●V-6420 Lever type single seated float valves
Single-seated on-off valve whose power source is the buoyancy of the float.

●T-8320 Small three-way type control valves
Small three-way control valve with screwed connection.

●V-6500C Small On-off valves
High-pressure small on-off valve which is integral with the cylinder.

●T-8710 Tantalum lining control valves
Angle-style control valve with tantalum lining which is excellent in corrosion resistance.

●T-8050 Acid & Alkali service small control valves
Small resin control valve for acid and alkali.

●R-2000 Roller valves WINK"
Control valve where the rotation of two rollers changes the opening area of the sleeve for smooth fluid control.

●T-8660 Pilot balance cage Y type control valves
Control valve where a Y-shape body with less liqid stagnation and a pilot cage trim are combined.

Positioner

●Electropneumatic positioner
This model is lightweight and compact electro pneumatic positioner with an easy zero/span adjustment.

●Smart positioner
This model is Smart positioner with HART Communication function.

●Electropneumatic positioner
This model is compact and lightweight electro pneumatic positioner with a built-in yoke.

●Pneumatic and pneumatic positioner
This model is a lightweight and compact pneumatic positioner with an easy zero/span adjustment.